HKY8037AEV is listed as an 80 t electric container carrier with a 120 kW permanent magnet synchronous motor and LFP battery. Overall dimensions are 12000 × 5900 × 6400 mm; inner width is 3700 mm and secondary lifting height is 1700 mm.
The photograph illustrates the brochure’s electric carrier series. Exact HKY8037AEV appearance and attachment are confirmed in the proposal.
HKY8037AEV brochure specifications
| Parameter | Brochure reference |
|---|---|
| Brochure-listed lifting capacity | 80 t |
| Overall length × width × height | 12000 × 5900 × 6400 mm |
| Inner width | 3700 mm |
| Secondary lifting height | 1700 mm |
| Minimum ground clearance | 300 mm |
| Permanent magnet synchronous motor | 120 kW |
| Battery chemistry | Lithium iron phosphate (LFP) |
| Lifting attachment | Oversized-load spreader |
Open the original Ruiding straddle carrier brochure (PDF page 4), printed page 05. The supplied manufacturer catalogue describes brochure versions; the current offered configuration is confirmed in a project proposal.
Specify the 80 t electric project as a complete system
Define the maximum loaded condition and its centre of gravity, including the approved attachment and any fixture allowances. The brochure’s oversized-load spreader description must be matched to actual lifting points, geometry and handling restrictions for the proposed equipment.
HKY8037AEV is 300 mm wider overall than HKY6037AEV, although both list the same 3700 mm inner width, 12000 mm length and 6400 mm height. Check access for the wider carrier and obtain wheel-reaction information for any floor slab, trench cover or crossing structure.
The 120 kW motor entry is not a battery-capacity or operating-cost figure. Provide loaded and empty travel, lifting cycles, ambient conditions and charging windows so the supplier can specify the battery and charger. Compare energy and maintenance costs only after those assumptions and the quotation scope are defined.
Compare the relevant model differences
On a small screen, swipe the table to compare all columns.
| Model | Model details | Listed dimensions / capacity | Selection difference |
|---|---|---|---|
| HKY8037AEV | HKY8037AEV | 80 t; 120 kW | 5900 mm overall width; 3700 mm inner width |
| HKY6037AEV | HKY6037AEV | 60 t; 90 kW | 5600 mm overall width; 3700 mm inner width |
| HKY8037 | HKY8037 | 80 t standard series | Same listed overall dimensions |
Information needed for a configuration review
- Complete maximum-load condition and any offset centre of gravity.
- Attachment working envelope, locking method and engagement confirmation.
- Site access and structural review using proposed wheel reactions.
- Battery sizing, charger supply and a duty-based acceptance cycle.
Use the equipment RFQ checklist to define scope, destination and acceptance requirements. Catalogue dimensions and ratings are reference data; final working clearances and permitted operating conditions belong in the agreed configuration.
Questions buyers ask
Does 120 kW mean a longer runtime than the 90 kW model?
No. Motor power and battery energy describe different things. Runtime requires the proposed battery specification and the operating duty.
Is the 80 t electric frame wider internally?
The source lists 3700 mm inner width for both 60 t and 80 t AEV versions. The 80 t version has a greater overall width.
Can you provide a price and delivery time for HKY8037AEV?
These depend on the agreed configuration and project scope. Send the load, route, duty and destination for a current proposal; no standard price or lead time is provided in the brochure.
Request a HKY8037AEV configuration review
Share your maximum load, load drawing, lifting interface, route and operating cycle. Mention HKY8037AEV so the proposal can explain any changes from the brochure-listed version. Send your project requirements.
