HKY6037AEV is listed at 60 t with a 90 kW permanent magnet synchronous motor and LFP battery. Its overall dimensions are 12000 × 5600 × 6400 mm, with 3700 mm inner width, 1700 mm secondary lifting height and 300 mm minimum ground clearance.
The photograph illustrates the brochure’s electric carrier series. Confirm the appearance and attachment of the offered 60 t configuration.
HKY6037AEV brochure specifications
| Parameter | Brochure reference |
|---|---|
| Brochure-listed lifting capacity | 60 t |
| Overall length × width × height | 12000 × 5600 × 6400 mm |
| Inner width | 3700 mm |
| Secondary lifting height | 1700 mm |
| Minimum ground clearance | 300 mm |
| Permanent magnet synchronous motor | 90 kW |
| Battery chemistry | Lithium iron phosphate (LFP) |
| Lifting attachment | Oversized-load spreader |
Open the original Ruiding straddle carrier brochure (PDF page 4), printed page 05. The supplied manufacturer catalogue describes brochure versions; the current offered configuration is confirmed in a project proposal.
Plan the larger electric carrier around load and route
Compared with HKY3532AEV, this model has a larger listed frame, greater inner width and an oversized-load spreader. Supply the load drawing rather than treating the 60 t designation as the only change. The complete lifted mass, centre of gravity and attachment range still require review.
The 12000 mm overall length is relevant to the route, but it is not a swept-path drawing. Mark turns, narrow passages, gates and loading positions on the site layout. Ask for the proposed loaded travel envelope and wheel reactions before confirming ground or floor suitability.
A 90 kW motor and LFP chemistry do not establish shift endurance. Submit the actual transport cycle and charging opportunities. Compare HKY6037AEV with HKY6037 on complete operating scope, energy infrastructure and project-specific commercial terms.
Compare the relevant model differences
On a small screen, swipe the table to compare all columns.
| Model | Model details | Listed dimensions / capacity | Selection difference |
|---|---|---|---|
| HKY6037AEV | HKY6037AEV | 60 t; 90 kW | 12000 × 5600 × 6400 mm |
| HKY8037AEV | HKY8037AEV | 80 t; 120 kW | 12000 × 5900 × 6400 mm |
| HKY6037 | HKY6037 | 60 t standard series | Same listed overall dimensions |
Information needed for a configuration review
- Complete lifted mass, load outline and lifting-point coordinates.
- Loaded turning and access review for the 12000 mm carrier length.
- Shift cycle, gradients and time available for charging.
- Battery energy, charger input and electrical infrastructure in the quotation.
Use the equipment RFQ checklist to define scope, destination and acceptance requirements. Catalogue dimensions and ratings are reference data; final working clearances and permitted operating conditions belong in the agreed configuration.
Questions buyers ask
How is the 60 t AEV model different from the 35 t AEV?
The source lists greater capacity, a larger frame, 3700 mm rather than 3200 mm inner width, an oversized-load spreader and a 90 kW rather than 80 kW motor.
Is the 90 kW motor enough to confirm performance on a slope?
No. The proposed load, gradient, speed and operating limits need confirmation as a complete configuration.
Does the listed 300 mm clearance permit any outdoor route?
No. Minimum ground clearance is one dimension. Ground strength, unevenness, joints, drainage and the loaded route must also be reviewed.
Request a HKY6037AEV configuration review
Share your maximum load, load drawing, lifting interface, route and operating cycle. Mention HKY6037AEV so the proposal can explain any changes from the brochure-listed version. Send your project requirements.
