HKY8037 is listed at 80 t with a 12000 mm length, 5900 mm overall width and 6400 mm height. Its inner width is 3700 mm, with 1700 mm secondary lifting height and 300 mm minimum ground clearance. The brochure identifies an oversized-load spreader.
The photograph illustrates Ruiding’s energy storage carrier family; exact HKY8037 appearance and attachment are confirmed in the proposal.
HKY8037 brochure specifications
| Parameter | Brochure reference |
|---|---|
| Brochure-listed lifting capacity | 80 t |
| Overall length × width × height | 12000 × 5900 × 6400 mm |
| Inner width | 3700 mm |
| Secondary lifting height | 1700 mm |
| Minimum ground clearance | 300 mm |
| Lifting attachment | Oversized-load spreader |
Open the original Ruiding straddle carrier brochure (PDF page 3), printed page 04. The supplied manufacturer catalogue describes brochure versions; the current offered configuration is confirmed in a project proposal.
Review the 80 t load and the wider machine envelope
An 80 t rated reference does not remove the need to define how the load is distributed. Send the maximum complete mass, lifting-point positions, centre of gravity and any offset or asymmetric loading conditions. Ask the supplier to state permitted operating conditions in the proposed configuration.
Compared with HKY6037, HKY8037 is 300 mm wider overall in the brochure, while its listed inner width is unchanged. Do not interpret the extra overall width as extra load clearance. Check the full carrier, attachment and load envelope at gates, workshop exits and crossings.
The electric HKY8037AEV has the same listed overall dimensions and a 120 kW motor with LFP battery. Power-source selection requires a duty and infrastructure review; the common footprint does not establish equivalent energy use or continuous operating time.
Compare the relevant model differences
On a small screen, swipe the table to compare all columns.
| Model | Model details | Listed dimensions / capacity | Selection difference |
|---|---|---|---|
| HKY8037 | HKY8037 | 80 t; 5900 mm overall width | Standard series |
| HKY6037 | HKY6037 | 60 t; 5600 mm overall width | Standard series |
| HKY8037AEV | HKY8037AEV | 80 t; 5900 mm overall width | Electric series; 120 kW motor |
Information needed for a configuration review
- Full-load mass distribution and handling restrictions.
- Approved lifting points and oversized-spreader drawings.
- Route clearances for 5900 mm overall width, including turns.
- Wheel-load information for the floor, ground and any crossing structures.
Use the equipment RFQ checklist to define scope, destination and acceptance requirements. Catalogue dimensions and ratings are reference data; final working clearances and permitted operating conditions belong in the agreed configuration.
Questions buyers ask
Does HKY8037 provide more inner clearance than HKY6037?
The source lists 3700 mm inner width for both. HKY8037’s greater overall width should not be treated as additional space for the load.
Does an 80 t rating cover every operating condition?
The quoted rating must be tied to the actual load, configuration and approved operating conditions. Ask for the supplier’s stated limits.
Is the 80 t electric version smaller?
The source lists the same overall dimensions for HKY8037 and HKY8037AEV. Confirm the current configuration before planning site access.
Request a HKY8037 configuration review
Share your maximum load, load drawing, lifting interface, route and operating cycle. Mention HKY8037 so the proposal can explain any changes from the brochure-listed version. Send your project requirements.
