The HKY6037 brochure lists a 60 t capacity, 12000 × 5600 × 6400 mm overall dimensions, 3700 mm inner width, 1700 mm secondary lifting height and 300 mm minimum ground clearance. The attachment is described as an oversized-load spreader.
The photograph illustrates Ruiding’s energy storage carrier family. Confirm model-specific appearance, attachment and dimensions in the project drawing.
HKY6037 brochure specifications
| Parameter | Brochure reference |
|---|---|
| Brochure-listed lifting capacity | 60 t |
| Overall length × width × height | 12000 × 5600 × 6400 mm |
| Inner width | 3700 mm |
| Secondary lifting height | 1700 mm |
| Minimum ground clearance | 300 mm |
| Lifting attachment | Oversized-load spreader |
Open the original Ruiding straddle carrier brochure (PDF page 3), printed page 04. The supplied manufacturer catalogue describes brochure versions; the current offered configuration is confirmed in a project proposal.
A 60 t choice depends on the complete loaded condition
Specify the heaviest permitted container configuration, including installed energy storage equipment and applicable lifting fixtures. Provide the unit supplier’s centre-of-gravity limits and handling instructions. A payload estimate for an empty container is insufficient for an assembled BESS project.
HKY6037 and HKY8037 share the brochure’s listed 12000 mm length, 6400 mm height and 3700 mm inner width. The 80 t version is 300 mm wider overall. Capacity selection should therefore consider load mass and distribution together with machine envelope and site conditions.
The oversized-load spreader description is a reference to the catalogue arrangement, not an approval for any nonstandard load. Provide the lifting-point layout and request the attachment’s working range, engagement sequence and rated conditions for your unit.
Compare the relevant model differences
On a small screen, swipe the table to compare all columns.
| Model | Model details | Listed dimensions / capacity | Selection difference |
|---|---|---|---|
| HKY6037 | HKY6037 | 60 t; 5600 mm overall width | 3700 mm inner width |
| HKY8037 | HKY8037 | 80 t; 5900 mm overall width | 3700 mm inner width |
| HKY6037AEV | HKY6037AEV | 60 t; 5600 mm overall width | Electric series; 90 kW motor |
Information needed for a configuration review
- Maximum complete BESS mass and centre-of-gravity drawing.
- Spreader interface and attachment allowance in the lifting assessment.
- Loaded swept-path drawing for the 12000 mm-long carrier.
- Site floor or ground assessment using supplier wheel reactions.
Use the equipment RFQ checklist to define scope, destination and acceptance requirements. Catalogue dimensions and ratings are reference data; final working clearances and permitted operating conditions belong in the agreed configuration.
Questions buyers ask
Is the 3700 mm inner width the overall machine width?
No. The HKY6037 table separately lists a 5600 mm overall width. Both dimensions must be considered when checking the load and route.
Can HKY6037 load a road trailer?
The supplied parameters alone do not confirm that workflow. Submit trailer height, access geometry and the required lifting envelope.
Should I choose 60 t or 80 t?
Use the maximum complete lifted mass and approved load distribution, then review geometry and operating conditions. Do not select solely by a nominal container category.
Request a HKY6037 configuration review
Share your maximum load, load drawing, lifting interface, route and operating cycle. Mention HKY6037 so the proposal can explain any changes from the brochure-listed version. Send your project requirements.
