HKY3532AEV is listed as a 35 t electric container carrier with an 80 kW permanent magnet synchronous motor, LFP battery and automatic spreader. Overall dimensions are 7100 × 5100 × 6050 mm, with 3200 mm inner width and 1550 mm secondary lifting height.
The photograph illustrates the brochure’s electric carrier series; it is not a model-specific configuration drawing.
HKY3532AEV brochure specifications
| Parameter | Brochure reference |
|---|---|
| Brochure-listed lifting capacity | 35 t |
| Overall length × width × height | 7100 × 5100 × 6050 mm |
| Inner width | 3200 mm |
| Secondary lifting height | 1550 mm |
| Minimum ground clearance | 240 mm |
| Permanent magnet synchronous motor | 80 kW |
| Battery chemistry | Lithium iron phosphate (LFP) |
| Lifting attachment | Automatic spreader |
Open the original Ruiding straddle carrier brochure (PDF page 4), printed page 05. The supplied manufacturer catalogue describes brochure versions; the current offered configuration is confirmed in a project proposal.
Translate the 35 t workflow into an electric duty brief
List the loaded and empty travel distances, number of lifts, waiting periods and moves per shift. Identify whether charging can occur during breaks or between shifts. The 80 kW motor entry is power, not battery energy: it does not establish how long the carrier can operate.
The supplied brochure identifies LFP battery chemistry but does not provide battery capacity, charger input, charging time or endurance. Ask for these values in the proposed configuration and request operating assumptions for any runtime estimate.
This model shares listed geometry with HKY3532A, including the 3200 mm inner width and automatic-spreader description. Compare the agreed spreader interface and operating envelope separately from power supply. Do not assume standard container-size coverage from the AEV model name.
Compare the relevant model differences
On a small screen, swipe the table to compare all columns.
| Model | Model details | Listed dimensions / capacity | Selection difference |
|---|---|---|---|
| HKY3532AEV | HKY3532AEV | 35 t; 80 kW | 3200 mm inner width; automatic spreader |
| HKY6037AEV | HKY6037AEV | 60 t; 90 kW | 3700 mm inner width; oversized-load spreader |
| HKY3532A | HKY3532A | 35 t standard series | Same listed overall dimensions |
Information needed for a configuration review
- Maximum gross load and spreader engagement drawing.
- Moves, travel distance and lifting cycles for each shift.
- Charging windows, supply location and available electrical service.
- Requested battery capacity, charger specification and duty-based runtime calculation.
Use the equipment RFQ checklist to define scope, destination and acceptance requirements. Catalogue dimensions and ratings are reference data; final working clearances and permitted operating conditions belong in the agreed configuration.
Questions buyers ask
Is 80 kW the battery capacity?
No. kW is the listed motor-power unit. Battery energy would normally be specified separately in kWh; the supplied brochure does not give that value.
How many hours does HKY3532AEV run per charge?
No endurance value is supplied. Request a calculation based on the proposed battery and your travel, lifting and charging cycle.
Is an automatic spreader included for my exact container?
The brochure lists that attachment type. Compatibility and the offered spreader configuration require review of the container’s approved lifting interface.
Request a HKY3532AEV configuration review
Share your maximum load, load drawing, lifting interface, route and operating cycle. Mention HKY3532AEV so the proposal can explain any changes from the brochure-listed version. Send your project requirements.
