HKY3532A is listed at 35 t with an automatic spreader, 3200 mm inner width and 1550 mm secondary lifting height. Its brochure overall dimensions are 7100 × 5100 × 6050 mm. Compare both the lifting interface and site envelope when evaluating this model against B5 or the electric AEV version.
The photograph illustrates the brochure’s 35 t standard series; it is not a model-specific configuration drawing.
HKY3532A brochure specifications
| Parameter | Brochure reference |
|---|---|
| Brochure-listed lifting capacity | 35 t |
| Overall length × width × height | 7100 × 5100 × 6050 mm |
| Inner width | 3200 mm |
| Secondary lifting height | 1550 mm |
| Minimum ground clearance | 240 mm |
| Lifting attachment | Automatic spreader |
Open the original Ruiding straddle carrier brochure (PDF page 3), printed page 03. The supplied manufacturer catalogue describes brochure versions; the current offered configuration is confirmed in a project proposal.
Match the automatic spreader to the actual load
The catalogue’s automatic-spreader label does not establish compatibility with a particular container size or corner-fitting layout. Send the lifting-point coordinates, gross mass and handling instructions. Ask for the proposed spreader drawing, engagement method, load-confirmation signals and operating sequence.
Compared with HKY3532B5, the A version has a shorter listed length and a greater overall height. The same nominal capacity and inner width do not make the two lifting systems equivalent. Review operator access, attachment reach and loaded clearances for the actual workflow.
HKY3532AEV lists the same overall dimensions, inner width and secondary lifting height, but adds an 80 kW motor and LFP battery in the brochure. That is a useful comparison starting point; it does not mean all components or operating performance are identical.
Compare the relevant model differences
On a small screen, swipe the table to compare all columns.
| Model | Model details | Listed dimensions / capacity | Selection difference |
|---|---|---|---|
| HKY3532A | HKY3532A | 7100 × 5100 × 6050 mm | Standard series; automatic spreader |
| HKY3532AEV | HKY3532AEV | 7100 × 5100 × 6050 mm | Electric series; 80 kW motor and LFP battery |
Information needed for a configuration review
- Container or unit drawing and confirmed lifting-point geometry.
- Requested pick-up, placement and loading heights.
- Loaded route clearances and ground bearing conditions.
- Operating cycle and comparison with the battery-powered AEV version.
Use the equipment RFQ checklist to define scope, destination and acceptance requirements. Catalogue dimensions and ratings are reference data; final working clearances and permitted operating conditions belong in the agreed configuration.
Questions buyers ask
Is the automatic spreader compatible with every container?
No universal compatibility is specified in the source. The lifting interface and container dimensions need confirmation.
Is 1550 mm the maximum container stacking height?
No. It is the brochure’s secondary lifting-height entry. Stacking or trailer capability requires a working-envelope drawing and project-specific confirmation.
How does HKY3532A differ from HKY3532AEV?
The AEV brochure adds electric-drive references: an 80 kW motor and LFP battery. Compare the complete proposed configurations and energy supply, rather than inferring identical duty from their shared dimensions.
Request a HKY3532A configuration review
Share your maximum load, load drawing, lifting interface, route and operating cycle. Mention HKY3532A so the proposal can explain any changes from the brochure-listed version. Send your project requirements.
