HKY3532B5 is a brochure-listed 35 t standard energy storage carrier with a chain and lock assembly. Overall dimensions are 9100 × 5100 × 5450 mm, with a 3200 mm inner width and 240 mm minimum ground clearance. The table does not list a secondary lifting height for this model.
The photograph illustrates the brochure’s 35 t standard series; exact HKY3532B5 appearance and attachments are confirmed in the offered configuration.
HKY3532B5 brochure specifications
| Parameter | Brochure reference |
|---|---|
| Brochure-listed lifting capacity | 35 t |
| Overall length × width × height | 9100 × 5100 × 5450 mm |
| Inner width | 3200 mm |
| Secondary lifting height | Not listed in the source table |
| Minimum ground clearance | 240 mm |
| Lifting attachment | Chain and lock assembly |
Open the original Ruiding straddle carrier brochure (PDF page 3), printed page 03. The supplied manufacturer catalogue describes brochure versions; the current offered configuration is confirmed in a project proposal.
Understand the chain and lock arrangement before selecting
The defining difference from HKY3532A is the listed lifting attachment. Supply the load’s lifting-point drawing and handling instructions so the chain geometry, locking arrangement and allowable orientation can be reviewed. Ask which steps require operator intervention and how attachment engagement is confirmed.
HKY3532B5 is 2000 mm longer than HKY3532A in the brochure, while both list the same 5100 mm overall width and 3200 mm inner width. A lower overall height does not by itself establish a lower doorway requirement: check the complete loaded operating envelope and any raised attachment.
The secondary lifting-height entry is unavailable in the source table. It is not a zero-height specification and must not be used to determine trailer loading or placement capability. Request a lifting-range drawing for the proposed arrangement.
Compare the relevant model differences
On a small screen, swipe the table to compare all columns.
| Model | Model details | Listed dimensions / capacity | Selection difference |
|---|---|---|---|
| HKY3532B5 | HKY3532B5 | 9100 × 5100 × 5450 mm | Chain and lock assembly |
| HKY3532A | HKY3532A | 7100 × 5100 × 6050 mm | Automatic spreader |
Information needed for a configuration review
- Lifting-point locations, permitted chain angles and load handling instructions.
- Operator access for attachment, locking and release.
- Required lifting range and final placement height.
- Route layout accommodating the listed 9100 mm carrier length.
Use the equipment RFQ checklist to define scope, destination and acceptance requirements. Catalogue dimensions and ratings are reference data; final working clearances and permitted operating conditions belong in the agreed configuration.
Questions buyers ask
Does HKY3532B5 have the same attachment as HKY3532A?
The brochure lists a chain and lock assembly for B5 and an automatic spreader for A. The supplier must confirm the arrangement appropriate to the load.
Why is secondary lifting height shown as not listed?
The original table has no numerical value for B5. The website preserves that gap rather than treating it as zero or copying the A model’s value.
Is B5 a cheaper option?
The source contains no comparable prices. Compare the actual scope, lifting interface, site requirements and quotation before assessing cost.
Request a HKY3532B5 configuration review
Share your maximum load, load drawing, lifting interface, route and operating cycle. Mention HKY3532B5 so the proposal can explain any changes from the brochure-listed version. Send your project requirements.
